Discounted Air- Conditioners
Units and Installation
Get a Discounted Energy-Efficient Air Conditioner
Looking for an Air conditioning unit in Adelaide? Reverse cycle (or split system) air conditioners help keep your home warm in winter and cool in the summer. If you are planning on getting a brand-new split system air conditioning unit for your home, you may access great discounts on units and installation when selecting an energy-efficient unit thanks to the Retailer Energy Productivity Scheme (REPS).
Have a South Australian Government Concession Card?
Learn more about our Air Conditioning offer from $699
yess.net.au/air-conditioning
Special Offer
Take advantage of our final two fully installed Fujitsu units at an unbeatable price of $999*. To benefit of this Air conditioning offer in Adelaide, Contact us today to arrange a complimentary on-site assessment. Don’t wait and miss out on this incredible opportunity!
2.65 kW Rinnai P Series
Wi-Fi Control – 5-year warranty
Small (Up to 20m2)
From $699
3.55 kW Rinnai P Series
Wi-Fi Control – 5-year warranty
Medium (Up to 40m2)
From $1155
5.0 kW Rinnai P Series
Wi-Fi Control – 5-year warranty
Large (40-60 m2)
From $1575
7.0 kW Rinnai P Series
Wi-Fi Control – 5-year warranty
Large (60+ m2)
From $1945
Rinnai P Series
Brochure
Click on the image to download
2.5 kW Fujitsu Lifestyle Range
5-year warranty
Small (Up to 20m2)
From $1360
3.5 kW Fujitsu Lifestyle Range
5-year warranty
Medium (Up to 40m2)
From $1795
5.0 kW Fujitsu Lifestyle Range
5-year warranty
Large (40-60 m2)
From $2475
6.0 kW Fujitsu Lifestyle Range
5-year warranty
Large (60+ m2)
From $2850
7.1 kW Fujitsu Lifestyle Range
5-year warranty
Large (60+ m2)
From $3150
Fujitsu Lifestyle Range
Brochure
Click on the image to download
2.5 kW Mitsubishi Heavy Industries Avanti Plus
5-year warranty
Small (Up to 20m2)
From $1550
3.5 kW Mitsubishi Heavy Industries Avanti Plus
5-year warranty
Medium (Up to 40m2)
From $1750
5.0 kW Mitsubishi Heavy Industries Avanti Plus
5-year warranty
Large (40-60 m2)
From $2450
6.3 kW Mitsubishi Heavy Industries Bronte
5-year warranty
Large (60+ m2)
From $2800
7.1 kW Mitsubishi Heavy Industries Bronte
5-year warranty
Large (60+ m2)
From $2975
8.0 kW Mitsubishi Heavy Industries Bronte
5-year warranty
Large (60+ m2)
From $3670
9.5 kW Mitsubishi Heavy Industries Bronte
5-year warranty
Large (60+ m2)
From $4475
Mitsubishi Heavy Industries
Brochure
Click on the image to download
These prices include the unit price and a standard installation in NCC zones 4-5.
Prices may vary for NCC zone 6, special Installation and additional requirements.
Travel Surcharge applies for addresses 30km+ from Adelaide CBD. $2.75 per km.
Register your Interest
Register your Interest below. Our team will contact you to discuss how to apply for the offer.
Visual FAQ
Hi-wall split reverse cycle air conditioner (RCAC) for both cooling and heating of individual rooms. A flexible conduit protects your air conditioning system wiring from liquids and dust.
Condensate is a byproduct of your cooling system: it’s the moisture that your AC system removes from the air and “condenses” into liquid form in the process of cooling the air in your space. The condensate drain line usually exits at the outdoor compressor position. The water will run off the concrete footings and drain into the soil.
Standard Installation
In a standard installation, the electrical feed from the switchboard (up to 15m) is concealed inside the wall and/or ceiling cavity.
Special Installation
Additional fees may apply to run the electrical feed in a conduit attached to the external wall where there isn’t a wall cavity (Weatherboard or stone walls).
Wall capping to cover wires on the external wall.
Back to Back
Standard back-to-back pricing includes refrigerant lines up to 3 meters in length connected to the rear of the head unit.
Side Exit
Side Exit from the Head unit affixed to the internal wall. (standard installation is with the head unit on the wall that backs to outside)
General Terms and Conditions
Activity Eligibility Requirements
– Any household in South Australia where the installed product requirements and minimum installation requirements can be met, notwithstanding that all the pre-existing heater/s within the conditioned spaces of the premises must be fully decommissioned, removed from the property and disposed of.
– Each REPS activity can only be provided once per address.
Installed Product Requirements
(1) The reverse cycle air conditioner (non-ducted) must achieve the following minimum performance standards under AS/NZS 3823.2 (2013) or GEMS Air Conditioners up to 65kW Determination 2019 as applicable:
• Heating Performance a. AS/NZS 3823.2 (2013), minimum 3.5 stars or minimum ACOP of 4.0
b. GEMS Air Conditioners up to 65kW Determination 2019, minimum 2.5 stars or minimum HSPF of 4.0
• Cooling Performance a. AS/NZS 3823.2 (2013), minimum 3.5 stars or minimum AEER of 4.0
b. GEMS Air Conditioners up to 65kW Determination 2019, minimum 2.5 stars or minimum TCSPF of 4.0
(2) The reverse cycle air conditioner (non-ducted) shall be single-phase and have a rated cooling output not exceeding 15kW.
(3) Multi-split systems are not eligible.
(4) The installed product must have a warranty of at least 2 years.
(5) Water loop heat pump products must be registered for sale under the Greenhouse and Energy Minimum Standards (GEMS) Act 2012 and comply with MEPS levels specified in AS/NZS3823.2 or GEMS Air Conditioners up to 65kW Determination 2019 as applicable.
(6) The installed product must include demand response capability, in accordance with AS/NZS 4755.3.1:2014, or AS/NZS 4755.2 (when published), or the equivalent of the superseded AS/NZS 4755.3.1:2012. In either heating or cooling mode, the device must be capable of operating in DR modes 1, plus modes 2 and/or 3 as defined in the above-noted standards.
Minimum Installation Requirements
(1) Any reverse cycle air conditioner (non-ducted) installed must comply with AS/NZS 60335.2.40.
(2) Removed pre-existing heaters/coolers shall have refrigerants and any other scheduled substances disposed of in accordance with the Australian and New Zealand refrigerant handling code of practice as established under the Ozone Protection and Synthetic Greenhouse Gas Management Act 1989 (Cth).
Get in touch to find out more
We’re here to help – any questions, please get in touch!